The design of the Notika pool includes an ingenious assembly system that combines wood and  steel. Unlike similar products currently on the market, the wood of the pool does not support the  structure nor does it sustain mechanical stress or water pressure.

The solid steel substructure does  all the work. This tried and true material used for over 40 years in the industry is very stable even  when exposed to significant climatic variations. Therefore, much like a bridge or a skyscraper, it is  the metallic substructure that ensures the solidity and the resistance of the entire structure.

Consequently, the wood used in this pool has a purely aesthetic function and is never subjected to  structural tension. This unique design ensures the solidity and the beauty of the pool for many years to come.

The Notika pool is made from a distinctive type of wood that has been torrefied, that is to say it has been heated to a temperature that exceeds 200 degrees C, without requiring the use of chemicals. Unlike wood that has been chemically treated by autoclave, torrefied wood becomes remarkably resistant to warping and deterioration related to wear and to the elements. Therefore, the Notika is a pool that is clearly superior to the models currently available on the market. The torrefaction of wood makes for a beautiful and solid pool that will stand the test of time.

Torrefied jack pine is the ideal material for pools because of its low moisture content, its great dimensional stability and its shrinking and swelling variation inferior to other types of wood. All of these characteristics make this wood extremely resistant to moisture and to climatic changes, which will avoid potential warping of the pool. In addition, because no chemical additives are used, the torrefaction process limits the absorption of moisture as well as the formation of fungus on the wood in a totally ecological and natural way. Finally, the torrefaction process gives the wood a deeper and totally homogeneous colour throughout the full cross-section, giving the Notika an added touch of charm.

FLOATING PANELS

Floating panels let the wood move naturally (shrinking and swelling) allowing it to adapt to the exterior conditions with no damage to the pool.

STURDY AND ADJUSTABLE SECURING SYSTEM

The top seat is held in place with an easy-assembly steel securing system embellished by stainless steel decorative hardware. The system increases pool resistance by securing the top seat to the joiner plate so that the steel bears the stress, not the wood.

UNMATCHED DURABILITY

In order to reduce the formation of cracks or fissures that could weaken the wood and allow moisture penetration, most of the screws are inserted into metal rather than the wood.

TOP SEAT

The two parts that make up the sturdy 24cm top seat of the Notika help reinforce the solidity and enhance the stylish design of the pool. They are held in place with a steel securing system that is embellished by stainless steel decorative hardware, adding in this way a distinguished metallic touch.

EASY INSTALLATION

Notika's steel structure is installed as easily as any other steel pool. The sections of the wood facing (panels and boards) are simply inserted by sliding them into the bottom wall channels or into the metal uprights.

MOISTURE PROTECTION

The wall panels and the boards covering the uprights are not in contact with the ground. In order to limit moisture-related problems, the panels are inserted into a plastic extrusion that is then inserted into the bottom wall channel, and alongside the uprights and rest on the joiner plate.

HIGH QUALITY LADDER

Built from the same beautiful wood as the Notika, the ladder brings a touch of sophistication with its wide and inviting steps. Furthermore, the exterior part of the ladder is detachable and can be removed for added safety between swims.

The oval pool is constructed with concealed lateral supports that are placed in the ground on the inside of the uprights. This installation is called the Yard Extender System (Y.E.S.), and was especially designed to obtain greater available yard space.

With the perfect combination of material and manufacturing processes, Vogue is able to produce a top quality liner. For optimum results Vogue uses the highest quality vinyl available and an automated heat sealing process with a 1/2” seam for perfect, waterproof and ultra-durable liner welded seam every time.

All Vogue pools are supplied with a standard 27 gauge all pattern wall and floor liner with tile-band. Typical life expectancy of a liner is 5-7 years depending on UV, pool temperature and chemical usage.

There are a number of special additives in pool liner material such as pigments, bacteriastats and fungicides. UV additives also give protection from ultra violet light.

A Vogue liner is manufactured in one piece and undersized to allow for a crease free stretch fit. This stretch fit causes the liner to stand away from the pool walls and especially near the water surface and above. It is impossible to damage the liner in these areas without using a sharp instrument as the liner has a stretch factor of 250%! Note. Any pool liner must be fitted in warm weather.