|
Alto
(HY40 - 12KW) Outdoor installation only.
This heat pump is great for the smaller pool construction and ideally suited
for the above ground swimming pools. Realistically priced, it offers great
value for money.
Environmental refrigerant gas absorbs and
transfers the heat energy through the refrigeration circulation system. The
fan circulates air through the outer Evaporator Air Coil that acts as a heat
collector. The liquid refrigerant in the air coil absorbs the available heat
in the air transforming it to a gas. The refrigerant gas is then pumped by
the Compressor. When this warmed gas is compressed, it intensifies or
concentrates the heat. This intensely hot gas is then pumped into the Heat
Exchanger Condenser where the actual heat exchange takes place. As the pool
water passes through the Heat Exchanger, the hot gas gives up its heat to
the cooler pool water. The refrigerant returns to a liquid state and is
pumped through the Expansion Valve and then into the Evaporator Air Coil to
start the process over again.
A heat pump does not generate heat, it simply captures it and moves it from
air to water thus, providing an efficient an environmentally friendly system
for heating your swimming pool!
| |
Alto |
|
Model Number |
Alto 12Kw |
| Heating Capacity
(Btu/h) |
40000 |
| Cooling Capacity
(Btu/h) |
35000 |
| Cooling |
2465 |
COP for heating (w/w)
(at 15 celcius air temperature) |
4.25 |
|
Refrigerant |
R407C |
|
Power
Supply |
| Volt/Phase/Hz |
230/1/50 |
| Operating amperage
(average) (A) |
11.3 |
| Cooling |
10.9 |
| Maximum current surge
protection (A) |
26 |
| Minimum flow rate m3/h
(imp.gls) |
2.5(550gls)
|
| Maximum flow rate m3/h
(imp.gls) |
10 (2200 gls)
|
| Noise Level (whole
unit) at 1m |
<52 |
|
System |
| Heat Exchanger |
Stainless Steel
|
| Compressor Type |
Rotary |
| Electric expansion
valve |
Y |
|
Features |
| Control panel - digital
display |
Y |
| Reverse cycle defrost |
Y |
| thermostatic expansion
valve |
Y |
| Compatible with salt
chlorinator |
N |
| Temperature indicator
(Celsius) |
15-45 |
| Dimensions WxHXD (mm) |
480x755x515
|
| Net weight |
65 |
| Packing Dimensions
WxHXD (mm) |
540x835x540
|
| Gross weight (Kg) |
70 |
This chart show
what percentage of your £1 will be used to produce heat in your pool.
Download Full Brochure
HERE
Download Instruction Manual
Here
|
Output |
BTU |
|
|
| |
|
|
|
| 12KW
With Titanium
Heat Exchanger. |
40,000 |
£1,890.00 |
 |
|
15KW With Titanium Heat Exchanger. |
50,000 |
£2475.00 |
|
|
